Pulsar 150 with Yamaha R15 kit

 

Surprised!!

Yes, it is possible to make your Pulsar look like Yamaha R15. 

From the front view it looks like Yamaha R15, but It is Pulsar 150 UG 2. According to me it is an impressive task done with great perfection. In order to attain this you have to change some parts of your Pulsar.

There are some points you should keep in mind. First here we changed Pulsar 150 tail kit to Pulsar UG 3. The second main point is while assembling seats (I mean split seats) you have to be very cautious. You have to weld a metal rod across the frame so that the complete weight over the rear seat will be on this rod and if its not aligned properly it could harm your fiber kit. I am saying this out of my personal experience.

Now lets talk about the Yamaha R15 kit. While assembling R15 kit you have to verify the symmetry and position of the kit and must check the ground clearance. You can cut the portion of the silencer which  is projected out in the front. And make sure about air flow. 

So do this to give your Pulsar a unique look.

SPARE PARTS USED ARE:

• YAMAHA R15 HEAD ASSEMBLY  KIT
• SPLIT SEAT
• PULSAR UG 3 TAIL KIT

 Pros

• It looks cool and makes you feel better. 
• The R15 kit has an aerodynamic structure.

Cons

• R15 kit very costly.
• Pulsar 150 is air cooled engine and the kit covers all over the engine, so make sure that engine gets sufficient air flow.

It looks cool, makes the ride awesome and the kit gives a sporty touch.